Techniques for Removing Paint From Tiles on Floor

It’s common for any homeowner or business person to conduct a renovation in his or her property. When changing places, it’s also a common to restructure. We tend to have dissimilarities in tastes and preferences thus the need for constant renovation.

Rebuilding structures may be in an effort to improve the quality of a business to make it more appealing to customers. This calls for some serious restructuring that may cost you an arm and a leg.

All in all, regardless of the nature different renovations take, it’s worth mentioning that damages on floors are unavoidable. Sometimes, during construction or normal paint jobs, the fluids tend to flow or spill on the floors.

If the floors are made of tiles, then there’s a huge chance that significant damage may be done in the course of spillage.

It’s very critical that the spilled paint is removed at the earliest convenience because it may be harder to scrape off if it dries and stays on the tiles for a longer time.

Dry paint is known to cause immeasurable damage to the tiles. The spillage of paint not only creates a messy adhesive, more especially on brightly colored tiles, but also risks tampering with the patterns of well placed tiles on the floor.

In case the spillage has been stuck on the tile surface for a long time, it’s considerably difficult to get rid of the coating that’s hardened on the floor.

Nonetheless, it’s still achievable to scrape the paint off. You’ll need a few essentials and a lot of time at hand, so you should be well prepared to handle the cleaning job to the last tile.

The easiness of the removal of paint from the tile surface will depend on how long the paint was held to the tiles, the type of paint that was splashed and the nature of the surface of the tile that needs to be grazed.

Modernization and technology has seen to it that various techniques that are helpful and effective at eliminating paint from tiles are made readily available to all people across the world.

Owing to this reason, there are a number of creative ways to easily get the paint off your tiles. Let’s take a god look at the most convenient and effective methodologies.

Cleaning the tiles when the stains are fresher

My best advice to anyone who is conducting a paint job or any other kind of renovation is to always clean off the paint when it’s still wet.

It’s the easiest and most effective way of cleaning the tiles because of the nature of paint when it’s still wet. In its wetter nature, paint is less adhesive and easier to wipe off.

The cleaning process can be done with the aid of a paper towel. Similarly, you could use a moist rag to carefully wipe around the spilled area and consequently leave to dry.

After the better part of the spillage has been wiped away, consider using the common solvents to completely erase the paint from the tiles.

Soapy water is the best alternative for completing the wiping action. You can choose to use this with sponges or warm water. These essentials will work best when removing latex based paints.

When dealing with oil based paints, it’s easier to eliminate the components by using a mineral spirit. Furthermore, scrubbing with a toothbrush will help in effectively getting rid of the paint.

The final residue of the paint is usually the hardest to remove. This is because paint sometimes leaves an adhesive coating that is more conjoined to the tile than stuck from the spillage.


Avoid steel-wool when scrubbing metallic tiles, ceramic designs and those made of porcelain. These types of tiles are very sensitive. Using a piece of steel-wool will scratch the surface and cause more damage than repair.

Paint that’s already dried

Unlike wet paint that is usually wiped, drier paint calls for more complicated tools as it needs to be scraped off. Because it’s been left too long on the surface, the paint is stuck for sometime and can’t be gotten off in a single try.

Advisably, don’t use metal tools to eliminate the paint because their hard surfaces will damage the tiles.

The safest tools to use are plastic knives. Besides, you can use a scrapper that isn’t designed to damage the tile. Xacto knives are also worthwhile considerations. They are safe and effective.

As you do the scraping job, ensure you’ve positioned the knife or scraper in a 45° angle to make it easier and safer to get rid off the paint.

When holding the scraping tool, ensure you’ve held it firmly and you’re handling the scraping job gently.

From time to time, check if the grazing job has left any damage on the tiles. When you’ve finished scraping, clean the surfaces with a sponge and soapy water.

Due to the harmful nature of hazardous chemicals in lead paints, it’s advisable that you wear a dust-mask to protect yourself rom contamination.

Heating and scrapping dry paint

Different types of paints have different melting points. In this process, you are required to use heat to warm the paint until it melts. When it’s turned into liquid, it becomes easier to scrape.

The cleaning exercise should be done in a safe way to prevent any damages from affecting the tiles.

Heating is done using heat guns. Similarly, some people incorporate air heating methods into the scraping process. You are free to choose the technique that’s convenient and more comfortable with you.

All in all, ensure you’ve adhered to safety standards by putting on a dust-mask prior to the heating process. This will prevent you from inhaling dangerous fumes from the heated paint.

Likewise, it’s critical that you ensure there’s adequate ventilation around the work area. Scraping the paint is a slow but careful process. You need to start from one place and slowly move step by step until you’ve covered the whole area.

Always make sure you’ve not done a hasty job that would interfere with the structure of the tile. The main purpose of the heating process is to soften the paint and not scorch the tile.

Scraping should be done at a 45° angle and with a plastic scraper. Carefully, start with the outermost edges of the paint, and if the paint comes of stripping, repeat the procedure throughout until you’re done.

The final task would be to clean the stripped tiles with soapy water and a piece of cloth.

Commercial removers

These are the agents to consider when you’ve already experienced a lot of trouble trying to get the paint from the tiles.

There are different types of tiles. Specific types have surfaces that stick easily with paint hence the coatings formed become harder to remove.

However, the nature of these cleaners makes them not only harsh with the coating but also perfect for doing the job in a shorter period compared to other removers.

To remove soft enamels on tiles, go for gentle removers. These can be made at home. They are also cheaper.

Commercial ones on the other hand, are costly options but save you time. The cleaning job of a commercial remover is perfect. The substances present in the remover will eliminate paint in entirety.


Whenever you’re purchasing a commercial remover, ensure you are familiar with the nature of the tile and the type of luster that forms with the tile.

Citrus based removers are the best because they do not damage the tiles. The first step when using commercial removers is to clean the tiles. Use any agent to clean, then ensure it dries before testing the remover.

You can conduct the testing in hidden places by applying a good quantity on the painted area. Depending on the instructions dictated by the manual, wait then clean the spot with a clean cloth. Finally, use a plastic scraping tool or soft brushes to scrub the surface.

Clean the place on completion them wipe again. Repeat these steps in all the spilled places. When you’re done, use warm water, soapy water or mineral spirit to clean. You can dry with a clean cloth when through.

Natural ways that have proved to be effective

In case the painting is stubborn and isn’t getting off, mix water and vinegar in equal quantities then soak a rag in the solution.

When the cloth is puffed up, stick it on the area with paint for sometime before using soft brushes to scrub and wash the paint off.

Alternatively, boil vinegar in its solution, soak rags in the hot solution and lay them on the spilled parts. This process effectively works by softening the hard coat.

When the coating is weaker, use plastic scrubbers to eliminate the paint. The technique is perfect for perforated tiles when removing paint from tiles.


  1. The solution should be hot when the rags are soaked in it.
  2. Adding baking-soda to the vinegar solution would increase it’s potency and efficacy.
  3. When scraping, hold the blade at a 45° angle. Also, keep the knife sharp as this makes it easier to scrape.
  4. Keep yourself well protected by putting on a dust-mask. With commercial removers, ensure there’s proper ventilation.


Please enter your comment!
Please enter your name here